Trasmettitore compatto per umidità in olio

Link in einer Lightbox öffnen
  • Moisture in Oil

EE364

La forma compatta e la robusta scocca rendono il trasmettitore per umidità in olio EE364 adatto per l'integrazione in applicazioni OEM.Grazie alla elevata precisione e all'eccellente stabilità a lungo termine l'EE364 è il trasmettitore ideale per il monitoraggio in linea del contenuto di acqua in olio lubrificante ed isolante e nel gasolio.

  • EE364 Trasmettitore per umidità in olio

    Le grandezze disponibili sono l'attività dell'acqua (aw), contenuto di acqua (x) in ppm e temperatura dell'olio (T). I valori misurati sono prelevabili mediante due uscite analogiche 4-20mA ed una uscita digitale con interfaccia MODBUS.

    Applicazioni tipiche

    • Monitoraggio di
      • Olio per trasformatori
      • Olio lubrificante
      • Olio idraulico
      • Olio motore
      • Gasolio

    Caratteristiche

    • Misura dell' attività dell'acqua (aw), temperatura (T) e contenuto di acqua (x) in ppm
    • Due uscite configurabili 4...20 mA
    • Interfaccia MODBUS-RTU
    • Adatto a pressioni fino a 20 bar
    • Attacco al processo G 1/2" ISO o 1/2" NPT

    Dati Tecnici

    Range di misurazione
    0...1 aw
    -40...100°C
    Precisione
    ±0.02 aw
    ±0.2°C
    Uscite
    2 x 4-20 mA / MODBUS RTU
    Alimentazione
    10-28 V DC

    Calibrating your limits

    Your products and services can only be as precise as the tools you use to measure them. With more than 20 years of experience, the calibration team of E+E Elektronik focuses on providing a reliable service without any unnecessary delays or bias.

    Discover the value of working with an expert in calibration that prioritizes

    • accuracy,
    • fastness and
    • reliability

    Learn more

    Prodotti correlati

    EE381

    Downloads EE364

    Software di applicazione

    FAQ

    The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol runs on Ethernet hardware.

    Calibration for a specific oil is a laboratory procedure for determining the saturation curve of the oil. The saturation curve is described by two parameters (A and B). These parameters are used for setting up the moisture in oil sensor for correct calculation of the water content (ppm) out of the measured temperature and water activity (aw).

    Sensor replacement is possible for the EE360 models with the ordering code including PC4 (pluggable probe). Please see the operation manual for detail and spare part code ordering guide.

    Please see the cleaning instructions.

    No, coating is not available for the E+E MIO sensors.

    The standard scope of supply of E+E MIO sensors includes an inspection certificate according DIN EN 10204 - 3.1. For details on calibration certificates please see  our white paper "Calibration and Traceability in Measuring Technology".

    No, mineral transformer oils from different manufacturers are quite similar. A and B parameters are the same.

    Transmitter with "two-wire" technology receive the power from the process, and the signal is carried on return wire (closed current loop). With "three-wires" technology the power supply is separate from current output: 2 wires are the power supply and the third carries the signal.

    Vuoi sapere di più sui nostri prodotti?

    Errore: Impossibile caricare il modulo di contatto
    LinkedIn Logo